Rooting Android device with SuperOneClick rooter

s



I AM NOT RESPONSIBLE FOR ANY DAMAGE DONE TO YOUR PHONE



DOES NOT WORK ON:
Sprint EVO 4G
Droid Incredible
HTC Desire GSM
HTC Desire CDMA 
HTC Aria
Droid Eris 
HTC Wildlife 
HTC Legend
MyTouch Slide

1) Root access means you will have complete control of your phone, to load a custom ROM (e.g.- Cyanogenmod) or download apps that require root access from the Android Market

2) Only works on windows!!! (I know it gets annoying but i found a friend that let me do this on his computer)

3) You must have Microsoft .NET Framework 2.0 or higher.
                      32 bit: here
                      64 bit: here

4) Download latest version of SuperOneClick rooter, scroll down page to attached files then download latest version
                SuperOneClick rooter: here

5) On phone go to Settings > Applications > Development > Check USB Debugging

6) Plug in phone in to computer

7) Right click the root program and click 'Run as Administrator'

8) Click the root button and wait for it to finish, YOU'RE ROOTED!! (See below if it gets stuck at 'waiting for device'

9) To check if rooted go into apps then check if superuser permissions is in there

Reported Issues

Issue: rooting program gets stuck on waiting for device

Solutions:
1) Make sure USB debugging is enabled- If step fails, go to Step 2

2) Close rooting program, turn off phone (still plugged in). Open rooting program and click root button and the power button on your phone at the same time.- If step fails, go to Step 3

3) Close rooting program and un-plug phone. Go to PDANet site, and install the drivers required for your phone. Once done installing, plug the phone back in and re-open rooting program and try again

If none of these steps work then it's not worth going through the very complicated manual procedure
Artikel Lainnya : , ,

How To Install Honeycomb A ROM On HTC Flyer

s
People were looking for a guide to show them how to install a honeycomb rom on htc flyer now finally  we have a how-to guide a developer  informed us about this complete guide for installing Android Honeycomb on the HTC Flyer.
According to the source, this guide has only been tested on a Euro WWE 32GB 3G Flyer, but it may work on other configurations as well. The ROM is completely stock and if you have all the necessary files, you can revert back to Gingerbread if needed. Please be sure to know how to proceed before starting as this may damage your device.

How To Install Honeycomb A ROM On HTC Flyer
Please Read This Carefully:

  • This process is recommended for experts only!
  • This guide is only tested on a Euro WWE 32GB 3G Flyer – it may work on other configurations, but this is untested (i’d advise reading the topic to see if anyone has experimented with your configuration!)
  • Anything you do from this point forward is at your own risk – my Flyer works and i’ve resurrected a couple of others, but I take no responsibility if it all goes horribly wrong. You COULD brick your tablet
  • Do NOT under any circumstances run the RUU in it’s entirety nor ‘fastboot flash rom.zip’ – this will make irreversible changes that you don’t want!
  • Be careful if you flash any RUUs or do anything that could revert you to S-ON on a broken system – this could leave you stuck


Instructions to Install HoneyComb ROM ON HTC FLYER:

  • Ensure you have an RUU that matches the ROM version on your Flyer. I used the 2.00.405.3 WWE ROM which can be found here - DOWNLOAD – MD5: 28a32c0b1262ced44a547e4a9a42d9b0. This is important for rollback purposes and disaster recovery purposes. Ensuring you have the RUU and your device version matches is your responsibility! If you use a different RUU however, post it below for your peers to benefit from. A reference topic containing various RUU files can be found here.
  • Download the Honeycomb system image for clockworkmod – you’ll need this later - DOWNLOAD – MD5: a068750ade064f4fe3913fe9e13d976f
  • Download the Honeycomb radio image – you’ll need this later - DOWNLOAD – MD5: d6b36ccb1cbdc0a86f41a8f63b7ae52f
  • Download the Honeycomb boot image – you’ll need this later - DOWNLOAD – MD5: 26f53c6a6e686751e300340af7496b8c
  • Download the revolutionary recovery image patched for new hboot compatability – you’ll need this later - DOWNLOAD – MD5: 16fe327f70c3036af69c19ec93b87e44
  • Download the updated hboot – you’ll need this later – ensure you check the MD5 after download (VERY important) - DOWNLOAD – MD5: 2eb541192be861ecceb2baa254403ade
  • Unlock your Flyer’s bootloader with Revolutionary.
  • You should still be in bootloader – if not, use ‘adb reboot bootloader’ to return to fastboot
  • Flash your device’s radio with the Honeycomb radio with the fastboot command ‘fastboot flash radio stock-hc-flyer-radio.img’
  • Flash your device’s boot image with the Honeycomb boot image with the fastboot command ‘fastboot flash boot stock-hc-flyer-boot.img’
  • Launch ClockworkMod recovery – navigate to the ‘bootloader’ menu then select ‘recovery’
  • Push the new hboot to your device (you’ve checked the MD5 right?) and flash – ‘adb push stock-hc-flyer-hboot_1.11.0006.nb0 / && adb shell dd if=/stock-hc-flyer-hboot_1.11.0006.nb0 of=/dev/block/mmcblk0p18′
  • Reboot to the new bootloader – ‘adb reboot bootloader’
  • You are now in a state where you must unlock the bootloader using the HTC tools – visit http://www.htcdev.com/bootloader/ and follow the instructions (Flyer compatability isn’t listed, but it’ll work)
  • Flash your device’s recovery with the patched-to-work-with-new-hboot revolutionary recovery – ‘fastboot flash recovery revolutionary-cwm-4.0.1.4-flyer.newhboot.img’
  • Launch ClockworkMod recovery – navigate to the ‘bootloader’ menu then select ‘recovery’
  • Flash the Honeycomb system zip by copying / pushing to sdcard (adb shell mount /sdcard && adb push stock-hc-flyer-system.zip /sdcard/) then using the on screen menus
  • Erase data / cache using the on screen menus
  • Reboot the device and you should be done!
If you need further assistance and support please feel free to contact the developers here
Artikel Lainnya : , ,

How To Root Samsung Galaxy 3

s

How To Root Samsung Galaxy 3 Running Android 2.2 FroYo

How To Root Samsung Galaxy 3
Most widely used Root tool for android devices is Z4root. Z4root is  one of the easiest ways to root most Android phones, but this rooting method does not work on Samsung Galaxy 3 if it is running Android 2.2 FroYo. There are many other alternative ways to achieve root on samsung galaxy 3.  Using the following guide, you can easily root as well as unroot your Galaxy 3 running FroYo, courtesy of the community at XDA-Developers forums.
Artikel Lainnya : , ,

How To Root Rogers Captivate Android 2.3.3 Gingerbread

s

Root Rogers Captivate Running Android 2.3.3 Gingerbread

How To Root Rogers Captivate Android 2.3.3 Gingerbread
Samsung Galaxy S Captivate was released on Rogers ( A Telecommunication Newtrok), this phone has some some different characteristics from other variants. few days ago a Gingerbread upgrade for Rogers Captivate was rolled and this in reality killed the root privileges. Today i am sharing an easy way to get root privileges back.
Artikel Lainnya : , ,

How To Root LG Thrill 4G Super One Click

s

How To Root LG Thrill 4G With Super One Click

How To Root LG Thrill 4G Super One Click
With so many Android phones offering dual-core CPUs, 4G connectivity, front-facing cameras, and giant screens, stereoscopic 3D support has become a new way to stand out in the marketplace. In June, HTC released the EVO 3Don Sprint, the first U.S. handset to offer a glasses-free 3D experience.
Artikel Lainnya : , ,

How To Root Telstra Motorola Xoom Honeycomb 3.1

s

Root Telstra Motorola Xoom Running Honeycomb 3.1

How To Root Telstra Motorola Xoom Honeycomb 3.1

How To Root Telstra Motorola Xoom Honeycomb 3.1

In case you have Motorola Xoom from Telstra and are looking to gain root privileges after latest Android3.1 Honeycomb update, then you problem is solved. I am writing this post because there is currently no information on rooting the Telstra specified Motorola Xoom from the Stock 3.1 and still keeping 3G (the latest 3.1 update, not the problematic one). Since I don’t have enough post to be able to write in 

Artikel Lainnya : , ,

How To Root Motorola Droid 3 Running Android 2.3.4

s
The Motorola Droid 3 features an excellent five-row QWERTY keyboard. The next-gen Droid also offers the latest Gingerbread software, a dual-core processor, and an upgraded 8-megapixel camera.
How To Root Motorola Droid 3 Running Android 2.3.4

Finally today Droid 3 has received an easy rooting method. Below is the complete procedure that you are required to perform in order to gain Root access. The root for the Motorola Droid 3 on Android 2.3.4 Gingerbread works on an exploit discovered by djrbliss and was written by framework43/psouza4.
Artikel Lainnya : , ,
Scroll to top